Aluminum single door roof hatch

 

LadderHatch.com

A DBA of A-Mezz Industrial Structures   

Home PageFixed LaddersGalvanized Roof HatchesAluminum Roof HatchesRoof Hatch Guarding
Ladder Safety Gates OSHA Fixed Ladder StandardOSHA Roof Hatch InterpretationCo
ntact Us

• Submittal Sheets • CSI Specifications Pitch Corrected Layouts
Steel Single DoorSteel Double Door • Aluminum Single Door • Aluminum Double Door

 

Ladder Hatch.com
Roof Hatches
MEZZ-RHA : Aluminum Roof Hatch

Cleveland, OH 44236 • Toll Free Phone: 888-432-2657 • Toll Free Fax: 866-550-5745 • www.ladderhatch.com

SERIES MEZZ-RHA - Single Door Roof Hatch

Descriptionaluminum roof hatches

The Ladderhatch.com MEZZ-RHA roof hatch is manufactured from aluminum to ensure years of dependable use, even in the most extreme weather conditions. The lids are mounted on a 12" curb with cap flashing to ensure against leakage. MEZZ roof hatches come standard with compression springs, zinc plated steel hardware, and insulation in the cover and at the curb parimeter

SPECIFICATIONS
 
Cover & Liner:
11 gauge (0.090") aluminum cover with an 18 gauge aluminum liner. Cover is stiffened to withstand a live load of 40 psf with a maximum deflection of 1/150th of the span. Cover also withstands a maximum wind uplift of 20 psf
Curb:
11 gauge (0.090") aluminum
Optional: 11 gauge aluminum double wall curb available (curb liner at exterior)
Hinge:
Tamperproof hinge contained within hatch as part of spring assembly
Latch:
Zinc coated steel slam latch. All single leaf hatches that exceed 60" hinge dimension are manufactured with a zinc coated 2-point latch
Springs:
Greased compression springs enclosed in telescopic tubes, which counterbalance the door to require no more than 10 lbs. of opening force
Hold Open Arm:
Locking hold open arm
Hardware:

Zinc coated steel

Optional: Stainless Steel

Insulation:
1" thick rigid insulation in cover and 1" at curb perimeter
Mounting Flange:
3-1/2"
Finish:
Mill
Warranty:
Five years from date of final acceptance

aluminum roof hatch drawing

Standard Sizes

width x length

(inches)

Standard Sizes

width x length

(mm)

 
24 x 24
610 x 610
 
30 x 30
762 x 762
 
30 x 54
762 x 1350
All units are hinged on second dimension (length.) Rough opening required = hatch size. Ladder hatch.com reserves the right to change the design or details of its products without notice.
30 x 96
762 x 2438
36 x 24
914 x 610
36 x 30
914 x 762
 
36 x 36
914 x 914
 
36 x 96
914 x 2438
 
48 x 48
1219 x 1219
 

 

 


We Sell roof hatches, industrial roof access hatch, aluminum roof hatch, galvanized roof hatches, commercial roof hatch, roof hatch guarding, OSHA roof hatch, single door roof hatch, double door roof hatch, babcock davis roof hatch, customized roof hatches, roof access ladders, fixed ladders, walk thru ladders, caged ladders and ladder safety gates


Roof Hatches Quote Request

A-Mezz Industrial Structures  
   Phone: (330) 650-5561
   Fax : (866) 550-5745
   Toll Free : (888) 432-2657